Platform OptionsCATALOG PDF 
320KB
Handwrapping is dangerous. An inexpensive alternative, the PalletPal™ Stretch Wrapper incorperates a low-profile powered disc turntable and a stationary mast assembly. Simply wheel a loaded pallet onto the disc and move the strech wrapping wand up and down the mast as the powered turntable spins the load.
Platform Options
 |
Manual or Powered Turntables Bearing mounted and supported turntables for rotating or positioning loads of work. |
 |
Vee Cradle Platform Vee shaped platform provides centering and secure handling of cylindrical loads, such as rolls. |
 |
Side-Shifting Platform Manual or powered platform side shift used to align loads with other handling systems or operating equipment. |
 |
Gravity or Powered Conveyor Tops Roller conveyor tops for integration with other handling equipment or systems. |
 |
Tilting Tops 30º, 45º, and 90º tilting platforms for better positioning of certain loads. |
 |
Fork Pockets Structural fork pockets allow entire unit to be lifted and moved by fork truck. |
 |
Ball Transfer Top Fixed or retractable ball conveyors for omnidirectional movement of load on platform. |
 |
Throw-Over Plates Hinged plates used to provide a bridge between the platform surface and an adjacent fixed height surface. |
 |
Access Plate Removable or hinged plate in platform surface allows access to power unit and hydraulics when lift is in down position. |
 |
Stainless Steel Platform Corrosion and damage resistant surface for use with corrosive materials or where frequent wash down is required. |
 |
Fixed and Removable Handrails with
Snap Chain For use in applications involving personnel lifting. Removable rails allow access from any side when lift is not in use. |
 |
Bellows Guard Accordian Skirting Two-ply bonded nylon or single-ply stitched polyester skirting covers mechanism between platform and base. Also available as boots to cover cylinders only. |
 |
Antiskid Platform Surfaces Diamond tread platform surface or abrasive type paint provide better traction for powered vehicles and reduce danger of personnel slipping. |
 |
Lightspeed Toe Sensor Fiber optic sensor stops table down movement when an obstacle is encountered. |
 |
Wheel Chock Counter-weighted wheel chock recessed in table top. Automatically engages as lift raises and prevents wheeled vehicle from rolling in set direction. |
 |
Bevel Toe Guard 30º bevel on platform sides provides warning contact without abrupt shear point when lift table is installed in pit. |