Forklift Accessories

View as List Grid

8 Items

per page
Set Descending Direction
  1. V-Force V-HFM Chargers - FS3

    A 46-pound single or three phase charger with an eight hour battery capacity of up to 1175 amps per hour. The V-HFM FS3 charger can be used for conventional and opportunity charging applications for any lift truck battery.

  2. V-Force V-HFM Chargers - FS5

    A 95-pound single or three phase charger with an eight hour battery capacity of up to 1500 amps per hour. The V-HFM FS3 can be used for conventional and opportunity charging applications for any lift truck battery.

  3. V-Force V-HFM Chargers - FS9

    A 123-pound single or three phase charger with an eight hour battery capacity of up to 3375 amps per hour. The V-HFM FS9 charger can be used for conventional, opportunity and fast charging applications for any lift truck battery.

  4. Forklift Fork Extensions
    Forklift forks are manufactured to ITA specifications and are made to meet the highest of quality standards. All forged forklift forks are manufactured in pairs, assuring you that every set of forks you purchase will be even in tip thickness and blade height. A locking pin kit comes standard on each forklift replacement fork to keep blade in place on lift truck.

    Available in Class 2 or Class 3 mount, forged forklift forks are available in lengths up to 96”. We have over 300 forks in stock ready to ship!
  5. Forklift Carpet Poles
    Rolled carpets are rolled so tightly they appear easy to carry. But we don’t have to tell you how unwieldy and even heavy they are. You also more than likely store carpet rolls on high shelves in your warehouse, making it dangerous for employees to remove from the shelf by hand. Enter carpet poles. These poles attached as a forklift attachment, allows the driver to insert the pole into the rolled carpet’s middle, lifting the carpet from its shelf and moving it another location. Our poles are made of high-tensile steel and are 2.5” in diameter, allowing them to carry carpet roles of up to 2,500 pounds (so long as the load is evenly distributed). The poles can be attached to the forklift trucks lifting mechanism itself or attached to the lift’s forks via a fork-mounted handle.
  6. Construction Man Basket
    Construction Man Baskets are designed to lift personnel in the air with a telehandler.

    Built to meet OSHA and ANSI Standards regarding construction work platforms, the construction man basket features a replaceable traction grit plywood floor, 42” high tubular sides, 2 side latching doors, 4” high kick plate and provisions for a safety harness hook-up. Full-length fork pockets provide added safety and strength to the construction man basket. Pin locks secure the man basket to the telehandler. Each construction man basket ships in a collapsed state to save significantly in shipping costs. 12 bolts and 15 minutes later, it is ready to use. All safety baskets are painted yellow for high visibility.

    Construction Man Basket Features:
    • 42″H Tubular Square Side Rails
    • Swing-In Door On Both Ends
    • Locking Pins Secure Basket To Lift
    • 4″H Kickplate On All Sides
    • 4 Harness Hook Points
    • Traction Grip Floor Surface
    • Full Length Fork Pockets Fit Up To 2.5″ x 7″ Forks
    • Collapsible Design Reduces Shipping Costs
    • 1000lbs. Capacity
    $2,437.50
  7. Forklift Forks
    Forklift forks are manufactured to ITA specifications and are made to meet the highest of quality standards.

    All forged forklift forks are manufactured in pairs, assuring you that every set of forks you purchase will be even in tip thickness and blade height. A locking pin kit comes standard on each forklift replacement fork to keep blade in place on lift truck.

    Available in Class 2 or Class 3 mount, forged forklift forks are available in lengths up to 96”.
  8. Boxed Forklift Fork Extensions
    The Boxed forklift fork extension encloses all 4 sides of the forklift fork to offer a tighter fit. The fork has minimal movement within the boxed extension and provides a more stable loading surface than conventional forklift extensions. This boxed extension is required for shaft mount forks but can be used for any type of forklift fork. Simply slide your fork into the forklift extension, and secure it by placing the locking pin through the brackets on the back. These forklift fork extensions are constructed form structural tubing. Taper on the end allows for ease on entering into product for movement.. 5/8″ thick pin on end of extension keeps it in place and makes it convenient to take on and off. Other sizes are available upon request.
View as List Grid

8 Items

per page
Set Descending Direction